Waterproofing Inspections Melbourne

Preventing water from entering and accumulating within a building is crucial to avoid creating unhealthy conditions and damaging building elements. In order to maintain healthy living conditions and to preserve the integrity of a building and its property, it is crucial to avoid the accumulation of water in internal wet areas. The type of membrane that you should use depends on the type of structure and the area of application, whether it be internal or external. An exposed membrane that has de-laminated from its substrate can be more easily cut torn when force is applied. Membranes that are designed to be fully bonded to their will exhibit reduced performance where a sufficient bond is not presen


This is the consequence of current construction waterproofing practices possessing ineffective quality control measures. Find out more about how we can help you achieve the best waterproofing compliance outcome. Our professional objectivity enables us to provide you with the most appropriate compliance recommendations. Our qualified team knows exactly what to look for when performing a thorough onsite waterproofing inspection. Our specialist team is fully licensed and holds both Australian and internationally recognised certificatio


Water damage can lead to costly repairs and a decrease in property value. We offer Building Inspections Services to homeowners, home buyers, owners corporations and strata managers. We ensure that proper drainage and waterproofing systems are in place. Outdoor spaces are surface slip resistance classification testing especially prone to water damage due to their exposure to the elements. Properties that undergo regular inspections, especially in essential areas like bathroom waterproofing and tiling, tend to retain their value better in the market. Identifying and addressing potential issues before they escalate demonstrates a proactive approach towards property maintenanc


Water is then applied to the area within the perimeter wire ensuring full coverage of the surface is achieved. Liquid membrane coatings generally vary in thickness and with an incorrect calibration, a breach can be missed or the membrane can be damaged by the spark when passed over a thin coating section. With this form of testing as outlined in the ASTM D7877 guide, a special electrode brush is passed over the surface of the non-conductive membrane. The testing of waterproof membranes is a quality control method to identify breaches, defects or leaks in the membrane before it is covered over, allowing time to repair these deficiencies during or soon after installation. Independent Testing Australia (ITA) is fully accredited to perform waterproofing membrane testing in accordance with the requirements of AS/NZS 4858 and provide NATA endorsed documentation. Ensuring the bond of a waterproofing membrane to a substrate can play an important consideration in the overall performance of the waterproofing applicatio

Wasting water along with time delays involved with flood testing in areas that are large and deep (as walls can leak as much as floors, joints and penetrations under hydrostatic pressure) is no longer viable nor acceptabl


Seams on sheet membranes are also difficult for this method to accurately test as the thickness at the seam is doubled; high voltage current cannot travel laterally through a seam defect. However, not all ELD testing equipment can find breaches on vertical substrates, multiple horizontal breaches in a single test or test semi-conductive coatings – i.e. membranes such as Black EDPM, Black Butynol or polyurethanes tinted with Carbon black. ELD works by creating an electrical field between the membrane surface and a conductive deck or substrate [ie Concrete] which is earthed to the building.
Adhesion Testing
D) Requires temporary dams to be installed to partition off individual wet areas from non-wet areas in buildings, AS/NZS 4858 is the primary Australian standard that relates to the physical performance properties of waterproofing membranes specified for use in wet areas such as bathrooms, kitchens, laundries and wet rooms, to prevent water ingress and protect structures from moisture damage. The thickness readings are obtained by measuring the time taken for the ultrasonic signal to propagate from the probe to the coating/substrate interface and back. Independent Testing Australia (ITA) is equipped with specialised apparatus to test materials and provide data to coating manufacturers, specifiers, builders and waterproofers to determine product suitability for use in the Australian construction industry and satisfy documentation requirements of the Australian Building Code (BCA), the National Construction Code (NCC) and Australian Paint Approval Scheme specifications (APAS). The EFVM® leak detection system makes flood testing waterproofing membranes a thing of the past …

For example, a membrane designed for under-tile use, is not likely to be appropriate for usage in a planter box, and a membrane designed for use in a planter box, is not likely to be appropriate for usage on an exposed roofto